home *** CD-ROM | disk | FTP | other *** search
/ QRZ! Ham Radio 8 / QRZ Ham Radio Callsign Database - Volume 8.iso / pc / files / p_tapr / statecd.arc / STATE04.TXT < prev    next >
Text File  |  1988-09-03  |  4KB  |  110 lines

  1.  
  2. ******************* FILE 5 of 6 FILES **********************
  3.  
  4. (C) 31 JUL 88
  5.  
  6. Eric Gustafson,  N7CL
  7. 2018 S. Avenida Planeta
  8. Tucson, AZ 85710
  9.  
  10.  
  11.  
  12.           DPLL  Derived Data Carrier Detect (DCD)
  13.           For Filter Based and Single Chip Modems
  14.  
  15.  
  16.               COMMERCIAL TNC SIGNAL LOCATIONS
  17.                         (continued)
  18.  
  19.  
  20.                        Kantronics KAM
  21.  
  22.  
  23. Interfacing  anything to a Kantronics box isn't a job,  it's 
  24. an  adventure!    Kantronics  has  an  official  policy   of 
  25. discouraging  anyone from hooking any third party device  to 
  26. their  TNCs.   This  includes  external modems of  any  kind 
  27. (Never  mind  that their crystal ball has proven  cloudy  at 
  28. best in the past when trying to predict what modems might be 
  29. popular or necessary in the future).
  30.  
  31. This  policy  was  enunciated  to me  by  persons  in  their 
  32. technical  support  department  in  two  separate  telephone 
  33. conversations.   So it was not surprising to find that  they 
  34. didn't provide a modem disconnect header in the KAM.
  35.  
  36. What I did find a little surprising,  however,  was the fact 
  37. that  they  also refuse to provide an individual  owner  any 
  38. assistance with signal locations.  They don't say they don't 
  39. know,  they  say  they  WON'T help you!  If  you  want,  for 
  40. instance,  to interface a JAS-1 (FO-12) style BPSK modem  to 
  41. your  Kantronics  TNC,  you  are  on  your  own  as  far  as 
  42. Kantronics  is concerned.   Potential Kantronics buyers  who 
  43. are interested in working digital modes through this and the 
  44. upcoming MICROSAT packet store and forward satellites should 
  45. take note.
  46.  
  47. If  Kantronics thought that one day they might possibly make 
  48. a  radio,  you  would have to use  the  optional  Kantronics 
  49. built-in  radio  in all their TNCs.     Thank goodness  they 
  50. don't also make computers...
  51.  
  52. It  turns out that the necessary signals ARE available  (for 
  53. 1200  baud at least) in the KAM.   It is indeed possible  to 
  54. interface  either the 1200 baud BPSK / MANCHESTER  FM  modem 
  55. required for the JAS-1 bird or this DCD circuit (or both) to 
  56. the KAM.
  57.  
  58. At this time it is unclear whether the required clock signal 
  59. is  available for the DCD circuit to operate at 300 baud  on 
  60. this TNC.   Even if it is,  it would be more trouble than it 
  61. is  worth  to  interface  as it  would  either  require  two 
  62. separate  DCD circuits or a switching arrangement  to  allow 
  63. the use of one for both modems.
  64.  
  65. Since  it is unlikely that the filter / slicer modem used in 
  66. this  box  is a stellar performer when  working  with  small 
  67. shift  to  baud rate ratio signals of the type used  for  HF 
  68. packet,  maybe  we should only really concern ourselves with 
  69. 1200 baud operation anyhow.  
  70.  
  71. It  is worth noting that for wider shift to baud rate  ratio 
  72. signals like RTTY, ASCII, and AMTOR the filter / slicer type 
  73. demodulator  performance is perfectly  adequate.   When  the 
  74. shift  to baud rate ratio is greater than 1,  as with  these 
  75. modes, most of the transmitted signal energy is concentrated 
  76. around  and  very close to the two tone  frequencies.   When 
  77. this  is  the case,  the filter / slicer  is  the  preferred 
  78. method  of demodulation.  As these modes do not operate in a 
  79. Carrier Sense Multiple Access (CSMA) environment like packet 
  80. requires,  the  built in CD function is adequate  for  these 
  81. modes as well.
  82.  
  83. For 1200 baud operation then,  the signal location points of 
  84. interest in the KAM are as follows:
  85.  
  86. The Receive Data (RXD) signal is obtained from pin 8 of  the 
  87. TCM3105  modem  chip.   The Kantronics schematic shows  what 
  88. appear to be some numbered pads (17 and 18) on this lead  to 
  89. the  processor.   If  you  can locate these  points  on  the 
  90. circuit  board,  it may be easier to obtain the signal  from 
  91. one of these points.
  92.  
  93. The  X16  baud  clock signal is obtained from pin 2  of  the 
  94. TCM3105.
  95.  
  96. The POSITIVE TRUE Carrier Detect (CDT) signal from the modem 
  97. is  obtained from pin 3 of the TCM3105.   This line from the 
  98. modem to the CPU is labeled with 2 numbered pads (7 and  8).  
  99. The  connection between these 2 locations should be  broken.  
  100. JMP2 on the new DCD circuit will be used.
  101.  
  102. The DCD output from the new circuit is injected at pin 21 of 
  103. the 63B03 CPU.
  104.  
  105. The  front panel LED which normally indicates the CDT signal 
  106. activity will show the action of the new DCD circuit.
  107.  
  108. (continued in file #6)
  109.  
  110. EOF